Backyard Aquaponics
http://backyardaquaponics.com/forum/

DWC Floating raft material and DYI
http://backyardaquaponics.com/forum/viewtopic.php?f=13&t=28109
Page 1 of 1

Author:  RobSteele [ Jan 10th, '17, 01:38 ]
Post subject:  DWC Floating raft material and DYI

What does everyone use for their floating raft material, I've heard and seen a few different ways to go. Also does anyone have any good links or videos on cutting / making holes ?

Author:  Charlie [ Jan 10th, '17, 05:22 ]
Post subject:  Re: DWC Floating raft material and DYI

viewtopic.php?f=1&t=8346&hilit=raft

viewtopic.php?f=1&t=21432&hilit=dwc

viewtopic.php?f=1&t=25663&hilit=floating

viewtopic.php?f=1&t=25040&p=507597&hilit=raft#p507597

viewtopic.php?f=1&t=25480&hilit=raft

viewtopic.php?f=13&t=23340&p=511914&hilit=raft#p511914

viewtopic.php?f=1&t=17852&p=409109&hilit=coreflute#p409109

Author:  RobSteele [ Jan 10th, '17, 08:16 ]
Post subject:  Re: DWC Floating raft material and DYI

Thanks Charlie, the search feature here is a bit difficult to use for me. After reading those links and some other sources I'm thinking about using Owens Corning Foamular 250 boards and painting the top side. Any suggestions for paint?

Author:  dlf_perth [ Jan 10th, '17, 09:04 ]
Post subject:  Re: DWC Floating raft material and DYI

>> Thanks Charlie, the search feature here is a bit difficult to use for me

how to use search.... viewtopic.php?f=4&t=27201

Author:  mwdesign [ Jan 11th, '17, 05:23 ]
Post subject:  Re: DWC Floating raft material and DYI

I just made some out of lead free 1/2" PVC sheet and they work (sortakinda). They need to be thicker than 1/2" though. I'd say 1" at least. They were cut on a CNC router. https://www.facebook.com/BoatGraphicsPR ... =3&theater

Page 1 of 1 All times are UTC + 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/