Backyard Aquaponics
A place to discuss aquaponics

My questions is does it matter if the ICB totes I get are food grade or not? If I get one that had chemical in them is there a way to clean them and make sure they are safe before I start with my system?

most people will look for totes that stored a food product...
but.. if you give them a good scrub with detergent, then bleach, then a rinse with some vinegar, you can put the tote in the sun for a few days with some water in it, and if it starts to grow algae, i'd say it's ok...
i'm sure others here will comment with their experiences/thoughts..

_________________
my basement system;
viewtopic.php?f=18&t=8354

Howdy -

Yes any tote should be fine with a good clean (as mentioned by keith)

Mine had some kind of resin in them - and because they were black plastic and didnt require painting i took the risk. They're fine,

_________________
http://aquaponics.gigglebyte.com.au - A running blog of my aquaponics journey..
My system: viewtopic.php?f=18&t=13332
Facebook Group: https://www.facebook.com/groups/aquaponicsaustralia/

We used one that had stored clean motor oil, yuk, you would think! But it cleaned up beautifully and is now on its third crop of fish, no problemo Trout, Barramundi and now Trout again

_________________
viewtopic.php?f=18&t=1622&st=0&sk=t&sd=a&start=45 (Fayes system)
http://backyardfarming.com.au/phpbb3/vi ... f=24&t=119 (Fayes garden)

Mine had hydraulic oil but they have cleaned up alright and are now working as wicking beds

_________________
¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º>
.¸¸.·´¯`·.¸><(((º>

My System: viewtopic.php?f=18&t=5264
My Website: http://www.chillies-down-under.com
My Blog: http://www.seaweedguy.com

One of mine had concrete accelerant in it.... beat that

_________________
~2010/2011~
~2012/2013~
~My Yabbie Hunting Adventures~

Nuclear waste

_________________
¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º>
.¸¸.·´¯`·.¸><(((º>

My System: viewtopic.php?f=18&t=5264
My Website: http://www.chillies-down-under.com
My Blog: http://www.seaweedguy.com

Two IBCs I purchased from BYAP for some friends' projects contained some form of concrete mould oil which was easily dispatched with soft soap, a little elbow grease and a high-pressure sprayer. A final wash out with some (very) cheap vanilla essence and another high-pressure rinse resulted in not being able to smell any of the original contents.

Both systems are doing fine.

_________________
2008-2009: Experimental, NFT
2010-2012: IBC system(s)
2012-Now : 1000L FT, 500L GB, 23/25 trout (added 27Apr. 2 jumpers)

SkyPE: wabbit.com.au

Mine had some sort of printing press cleaner in it - the grass where I washed it out died within a week, but thorough cleaning with bleach and a few days in the sun and it's been fine.

_________________
Gazza's IBC system

Gaz and Danae's Garden

That smell would be great....

_________________
www.backyardaquaponics.com
Bringing Food Production Home

My bulky once held phosphate which is a corrosive liquid used in boilers to maintain certain pH levels. I washed it out with demin water (on tap at work ) and got the the LAB to take a sample and tested the water for copper, ammonia and phosphate and a few other nasties and the results were good.

What I want to know is.....Is the plastic BPA free?

_________________
My System

BTW, anyone know a good way of removing a quarter ton of gravel from the mud next to my grow bed?

_________________
tyson

Easy answer Tysonlee, elbow grease.

Sent from my GT-N7000 using Tapatalk 2

_________________
viewtopic.php?f=18&t=1622&st=0&sk=t&sd=a&start=45 (Fayes system)
http://backyardfarming.com.au/phpbb3/vi ... f=24&t=119 (Fayes garden)