All times are UTC + 8 hours

Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Feb 20th, '19, 05:31 

Joined: Mar 21st, '18, 09:40
Posts: 1
Gender: Male
Are you human?: yes
Location: czech rep.
Hello everyone,

I would like to ask for your help. I have some experiences with aquarium aquaponic (approx 100 l system), but this is something
else and I would like to consult this with the skilled user.

It is necessary to use swirl filter in the setup I describe below?

Buddy has a pond on backyard since June 2018, he's got trouts there and some perches there. The volume of the pond is approx 30,000 liters and is
placed in shadow. He use pond filter GREEN RESET 100L (2x25W UV-C, 100 l volume, 16 000 l/h).

We got the idea to make the aquaponic system and connect it to the pond by another pump. The AP system includes grow bed (750 liters of gravel)
and raft (400 l volume). I design the system with swirl filter unit, but I would like to ask you if this is unnecessary. The raft should be
clean, because the grow bed also works as a mechanical filter. But what growbed? Will it be necessary to filter the water from
the mechanical particles from the pond? Should we add a worms, which could reduce detritus, but will it be enough in
the outdoor environment?

Swirl filter serve as "waterworks", where I can reduce all flows and shut down both grow units independently. When we make it without
three blue swirl filters it will be simpler and cheaper, but in grow bed will not be filtered water.

How would you do that?

Thanks a lot for the reaction, I hope I wrote all the information about the problem

I apologize for my English and thank you for your help and your opinions.

01.png [ 413.64 KiB | Viewed 301 times ]
02.png [ 332.25 KiB | Viewed 301 times ]
03.png [ 223.73 KiB | Viewed 301 times ]
04.png [ 198.7 KiB | Viewed 301 times ]
05.png [ 167.23 KiB | Viewed 301 times ]
06.png [ 191.86 KiB | Viewed 301 times ]
Reply with quote  
PostPosted: Feb 20th, '19, 07:14 
Site Admin
Site Admin
User avatar

Joined: Mar 12th, '06, 07:56
Posts: 17726
Images: 4
Location: Perth
Gender: Male
Blog: View Blog (1)
Nice 3d modeling Chily... :thumbright: No, a swirl filter isn't needed, you can just pump straight to your media bed without any problem.

Life on the road

 Profile Personal album  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC + 8 hours

Who is online

Users browsing this forum: No registered users and 8 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Powered by phpBB® Forum Software © phpBB Group
Portal by phpBB3 Portal © phpBB Türkiye
[ Time : 0.159s | 18 Queries | GZIP : Off ]