Single barrel system

earthbound

We put together a single barrel system yesterday, filming and documenting so that we can release it for people at a later date.

Here's the condensed version for now..

Take one barrel and cut the top off.

Attachment:

DSC_0412 (Medium).JPG [ 47.48 KiB | Viewed 2997 times ]

Measure 4 equally spaced sections around the top when you can cut out V shapes 2cm wide by 15 cm deep.

Attachment:

DSC_0432 (Medium).JPG [ 47.42 KiB | Viewed 2997 times ]

Drill some holes and use cable ties to draw the gaps in together.

Attachment:

DSC_0441 (Medium).JPG [ 45.21 KiB | Viewed 2997 times ]

Cut whatever shaped access hole you want in the lower fish tank section.

Attachment:

DSC_0457 (Medium).JPG [ 41.58 KiB | Viewed 2997 times ]

Cut hole in back for pump power cord.

Attachment:

DSC_0463 (Medium).JPG [ 62.07 KiB | Viewed 2997 times ]

Cut holes in top bed section for irrigation and drain (depends on what you are using).

Attachment:

DSC_0476 (Medium).JPG [ 64.8 KiB | Viewed 2997 times ]

Put on temporary drain pipe, fill with clay and wash.

Attachment:

DSC_0484 (Medium).JPG [ 64.72 KiB | Viewed 2997 times ]

Stand back and admire handy work...

Attachment:

DSC_0505 (Medium).JPG [ 52.71 KiB | Viewed 2997 times ]

And of course fill with water, add fish and plants.... :thumbright:

Took us about 2 hours to make this yesterday including all the filming and photographing, a great project for people to do on a weekend.

paul s

nice work , looks great , how many fish do you think could be housed in a system this size ?

nat

just stock with small ornamental fish pygmy perch, minnows, goldfish or whatever you like i have one with 40 zebra danios and another with 20 pygmy perch this one has 5 goldfish

Charlie

Cool

nat

the plants are doing well

Attachment:

20022012060b.JPG [ 43.24 KiB | Viewed 2535 times ]

Attachment:

05052012467b.JPG [ 58.45 KiB | Viewed 2535 times ]

folsplace

That is awesome

What type of fish are in there ?

nat

just some goldfish

Callatya

Perfect! This I can fit in the yard easily! It also looks much more birdproof than many of the other designs, and easy enough to fit a mesh door over to be sure :-) Thank you!

This is also perfect for a growout for tropical fish in summer! I've seen a bunch of kiddypool & potplant systems but this would be much simpler and space-efficient. Understock and overplant and you have a really good way to raise ornamentals outdoors :-) Very tempted to see if I can breed something just to try it ;-)

DavidGibb

what size pump do you use for a small systems like this?

nat

I've used a few different sizes ranging from 500lh to 1500lh the ones over 1000 don't seem to get blocked

this one has a 1350lh pump

Sent from my GT-I9100T using Tapatalk 2

ccBear

Constant flood or flood and drain on a timer?

nat

this one is constant flood nice and simple you

Sent from my GT-I9100T using Tapatalk 2

nat

These are some photos of the fittings

Sent from my GT-I9100T using Tapatalk 2

Backyard Aquaponics
A place to discuss aquaponics