Backyard Aquaponics
A place to discuss aquaponics

I like this idea .. tower and cages .. strawberries ... mmmmm...

I have an idea that I will sketch, photograph and post this weekend!



U guys and gals never cease to inspire!

_________________
My other hobby is making music. www.mp3.com.au/johnniemorris

mmmmmmm, I'm thinking of a stop past the 'B' shop on the way home.

_________________
www.backyardaquaponics.com
Bringing Food Production Home

Another way of going up..
http://www.vertigro.com/products/vg-1.php

Could be easily constructed with plastic square pots and a central pipe..
LB

Another Picture

That it could - given me an idea... I have 4 square pots which need a job - just found their job!

_________________
We care enough to help everybody with AP

Those leetuce look pretty bloody cramped!

guess somebody should eat them!

_________________
We care enough to help everybody with AP

I started to play with the 'Y' fittings that I got yesterday, they are going to be nowhere near as intensive as something like this....

_________________
www.backyardaquaponics.com
Bringing Food Production Home

Played around with some old pvc downpipes this arvo - here are the results

_________________
We care enough to help everybody with AP

what did you use to soften the pvc, murray used a hot air gun, but don't have one of those in the stash of tools available to me. Heard you can do it with boiling water but that would take a lot of water. Also did you think about altering the location of the holes so that they are offset and closer together on the pipe. That way you could have more plants in there. but otherwise they are very excellent towers. will have a crack when I get time and money. also if you filled it with gravel and ran you water through it you would have increased theoretical grow bed volume, thus allowing people to get closer to the magic ratio while not consuming to much physical space.

I used my wife's hot air gun (I bought it for her for her scrapbooking hobby, now I am making use of it too)... This tower will be strapped to a pole in the shadehouse so doing one like the example Murray made wont work for me - if it works well I will be making more of them to grow herbs.

_________________
We care enough to help everybody with AP

Good one aqua - your holes look very well formed.

You might want to be a bit wary of downpipe you find lying around - particulary if you cannot tell that it is reasonably new. Before a certain year (can't remember it) these PVC pipes contained lead. You don't want lead in your plants or your fish.

Sorry to be negative.

I know about that and checked out the pipe (there was some posts about this lead problem earlier somewhere) - I checked out the pipe and there was no evidence that it was old or overly well used - the level of weathering was not high at all... Anyway, if this works I will kake bigger ones out of new pipe which can hold more plants, and I will retire the "first born".

_________________
We care enough to help everybody with AP

Fantastic AM.... How did you seal the bottom end and get a fitting into it? Is it just heated and squashed with some sealant?

_________________
www.backyardaquaponics.com
Bringing Food Production Home

Yep, heated it and popped the smaller pvc pipe in and then warmed it up again, folded it and clamped it tighlty with some G-clamps - Later I added a lillte sealent just to make sure it wont leak my precious water out!

_________________
We care enough to help everybody with AP